İçeriğe geç

AvrupaBirleşik Krallık ve İrlandaBalkanlar ve KaradenizTürkiyeOrta DoğuAfrika

Yenisi yıllarca uzaktayken hizmette tutulan transformatör filoları

Durum değerlendirmesi, yağ işleme, rehabilitasyon ve devreye alma; bir transformatör filosu için program olarak satın alınır. Yeni üniteler yıllarca uzaktayken ömür uzatma, bu yıl başlayabilecek iştir. Yetkinliğin yerelde olmadığı yerlerde tesisler, test cihazları ve yedek parçalar sahaya gider.

Yenisinin teslimi yaklaşık 128 hafta sürer. Rehabilitasyon haftalar sürer.Yeni bir güç transformatörü için ortalama teslim süresi, ABD verilerine göre.Transformer life extension

Grid wire

All news
Araştırılan şehir
203
Acil müdahale ekipleri
24/7
Katalogdaki yağ testleri
15
01The situation

A failing transformer usually presents three bad options

Units running past their design life, chronic overloading, cycling from renewable in-feed, heat, dust and coastal salt all accelerate ageing. Then the choices narrow.

  1. 01

    Replace it

    US figures put the average lead time for a new power transformer at around 128 weeks, with specialised orders extending to four years. It is one order book, and buyers in every market queue in it on the same terms — then add freight, inland transport and customs.

  2. 02

    Ship it out for workshop repair

    Months out of service, and freight costs that on a remote site can approach the value of the asset itself.

  3. 03

    Run it to failure

    The real incumbent in many fleets. It is a decision, even when nobody makes it deliberately, and it is usually the most expensive one.

02How we are bought

Programmes, not line items

Utilities, industrial operators, IPPs and development-finance programmes buy a defined programme with an outcome. Condition assessment is the natural first step: low commitment, high insight, and it defines everything after it.

  1. A laptop showing frequency-response traces, set on the open case of a test instrument on a transformer cover, with test leads running to the bushings
    01Start here

    Fleet condition assessment

    A structured survey of your transformer population that produces a ranked, evidence-based picture of asset health and a prioritised intervention plan.

    Work executed and reported against

    IEC 60567IEC 60599IEEE C57.104+3
  2. A transformer active part hanging from a crane hook above its open tank against a deep blue sky, with two fitters at the tank edge
    02

    Rehabilitation and life extension

    Refurbishing a degraded transformer and returning it to reliable service instead of replacing it — weeks instead of years, at a fraction of replacement cost.

    Work executed and reported against

    IEC 60214-1IEC 60422IEC 60296
  3. Two technicians connecting hoses between a large black oil storage bladder and a treatment plant under a plastic sheet, beside a power transformer, the work area taped off
    03

    Oil management programmes

    Ongoing custody of transformer oil condition across a site or fleet. A single oil test is data; a trend is a decision.

    Work executed and reported against

    IEC 60422IEC 60814IEC 62021-1+2
  4. A transformer active part suspended above its tank in an outdoor switchyard, fitters working on top of the tank and a red mobile crane alongside
    04

    Installation and commissioning

    New assets from delivery to energisation, with the test evidence a lender or an asset owner reviews before accepting the asset.

  5. Looking up at high-voltage disconnectors and tall ribbed insulator columns on lattice steel gantries, with a technician working from a mobile elevating work platform against a blue sky
    05

    Substation and network services

    Primary and secondary equipment across the substation, not only the transformer.

  6. A fire-damaged transformer with a scorched, blackened tank and burnt fittings on its cover, standing outside a brick building, with a cable drum and coiled cable beside it
    06

    Emergency and failure recovery

    Mobilised breakdown response to remote sites, and the forensic work that establishes what actually happened.

    Work executed and reported against

    IEC 60076-18
  7. 07

    Training and capacity building

    Capability that stays behind after demobilisation. Frequently a contractual requirement where a development bank funds the work.

  8. A large power transformer in a concrete pit, with three high-voltage bushings above a bank of fan-cooled oil coolers and two technicians in hi-vis vests working on the tank cover
    08

    Maintenance contracts and O&M

    Multi-year scheduled maintenance across a site or network, with the records and trending an asset manager can report from.

03Standards

Çalıştığımız ve test ettiğimiz standartlar

Yayımlanmış uluslararası standartlar. Bir yöntemi anmak işin nasıl yapıldığını ve neye göre ölçüldüğünü söyler; sertifika iddiası değildir.

Şuna göre çalışırız
IEC 60076IEC 60214IEC 60270IEC 60296IEC 60422IEC 60599
IEEE kılavuzları
IEEE C57.104IEEE C57.106IEEE C57.152
IEC yöntemleri
IEC 60156IEC 60247IEC 60567IEC 60666IEC 60814IEC 62021-1IEC 62535
ASTM yöntemleri
ASTM D97ASTM D445ASTM D611ASTM D664ASTM D924ASTM D971ASTM D1275ASTM D1298ASTM D1500ASTM D1533ASTM D1816ASTM D2668ASTM D3612ASTM D5950ASTM D6045
ISO yöntemleri
ISO 2049ISO 2977ISO 3016ISO 3104
04From a finding to a programme

Programme scope builder

Choose what testing or inspection has shown, and see the tests that characterise it, the standards it is read against and the programmes that address it.

Select what you have found

Where this leads

Hizmet programları
00
Test methods
00
Standart tanımları
00

Select a finding to see the tests, standards and programmes that follow from it.

Guidance, not a diagnosis. What a result means depends on the unit's history, loading and other readings, and only an engineer who has seen all of them can say.

Transformatör sayısı

Fleet size sets the order of work.

Sent with the enquiry

Recorded for the engineer. The scope does not change.

Liquid-filled asset

Dry type: Cast resin and VPI — inspection, cleaning and electrical testing. No oil work applies. Transformer scope

Gerilim aralığı

Classed by the highest voltage for equipment, Um.

Hizmet programları
00
Test methods
00
Standart tanımları
00
Where this leads
05Remote and cross-border sites

Reach is part of the scope

For a remote or cross-border site, the programme also carries shipping, temporary import, customs, permits, abnormal-load transport, site generation, fuel and water planning, satellite communications, and a contingency for the part that does not clear customs. It is planned before the technical work, because it decides whether the technical work happens.

Mobilisation — eight stages, enquiry to demobilisation

  1. Enquiry

    Assets, site, symptoms and constraints. Enough to say honestly whether we are the right supplier.

  2. 02

    Site survey

    Access, condition and scope confirmed on the ground before a price is fixed.

  3. 03

    Mobilisation plan

    Equipment list, shipping route, clearance path, permits, team and dates.

  4. 04

    Shipping and clearance

    Consignment moves under temporary import, with clearance tracked to a date.

  5. 05

    Team deployment

    Technicians travel once the plant has cleared, not before.

  6. 06

    On-site works

    The scope executed against the agreed method statements and safety regime.

  7. 07

    Testing and handover

    Post-intervention test evidence, compared against the pre-intervention baseline.

  8. 08

    Demobilisation

    Plant re-exported, site left clean, used oil removed under a documented chain of custody.

06Addressable market

Ofislerin değil, pazarların haritası

Transformatör servisine en çok ihtiyaç duyulan ve en kolay ulaşılan yerlere göre sıralanmıştır. Hiçbirinde varlık ima edilmemektedir.

Araştırıldı · hizmet verilmedi bu levhadaki hiçbir şehirde Trafoser adı altında teslim edilmiş bir proje yoktur.

203 şehirden 0 tanesine hizmet — tek sembol, çünkü her şehir tek bir durumda. Bir işaret, hakkında okuduğumuz bir pazardır; bulunduğumuz bir yer değildir.

İddia edilmiyor — bu haritadaki hiçbir proje, hiçbir kıtada Trafoser adı altında teslim edilmemiştir

07Who we work for

Sectors

The asset is similar; the consequence of losing it is not.

10 sectorsShow allHide
  • Transmission and distribution utilities

    Ageing fleets and reliability targets, with the work funded through a regulated investment plan or a development-bank rehabilitation programme. Either way, each intervention has to be justified with condition evidence.

  • Manufacturing and heavy industry

    Cement, steel, textiles, food processing and chemicals — continuous processes where an unplanned transformer outage stops the line.

  • Independent power producers

    Contractual availability obligations, and lenders who require documented, auditable asset management. Test evidence is a reporting deliverable, not a nicety.

  • Oil, gas and petrochemicals

    Onshore and offshore, hazardous area discipline, and a consequence of failure measured in more than lost production.

  • Renewables and storage

    Solar plants, wind farms, battery storage and collector substations, frequently remote and frequently commissioned to a fixed grid-connection date.

  • Mining and metals

    Remote sites, heavy and harsh duty, and an extremely high cost of downtime. Often self-generating, which makes the transformer a single point of failure for the whole operation.

  • EPC contractors

    Installation and commissioning packages inside a larger project, where the only thing that matters is mobilising on the date agreed.

  • Critical infrastructure

    Hospitals, airports, water utilities and ports, where the tolerance for an unplanned outage is effectively zero.

  • Telecoms and data infrastructure

    Distributed power assets whose reliability underpins service availability across a whole network.

  • Rural electrification and mini-grids

    Distribution transformer fleets spread across long distances, usually under development-finance programmes with their own procurement rules and reporting.

Start with a condition assessment

Tell us the assets, the site and the situation. If the fleet's condition is unknown, an assessment is the lowest-commitment way to find out what you actually have — and it defines whatever comes next.

08Doğrudan hatlar

İletişim

Baştan ne kadar çok şey anlatırsanız ilk yanıt o kadar yararlı olur. Filonun durumu bilinmiyorsa bunu söyleyin — en yaygın başlangıç noktası budur ve kendine ait bir yanıtı vardır.

Bizi arayın

Cep telefonu ve WhatsApp
+90 532 657 48 78

Çalışma saatleri

Pazartesi–Cumartesi
07:00–18:00
Pazar
10:00–14:00

Local time · UTC+3—

Office hours are kept in UTC+3.

Ofis

Office 7408, 58 Peregrine Road, Hainault, Ilford, Essex IG6 3SZ, United Kingdom

Acil müdahale ekipleri

7/24, yılın 365 günü hizmetinizde — Noel, yılbaşı gecesi ve dünyadaki tüm resmî tatiller dahil